Signamax, Signamax 065-1696, 10/100/1000 To 1000SX/LX Managed Media Converters, Signamx Media Converters, Managed Media Converts, 100BaseFX Solutions, Gigabit Ethernet Solutions



Signamax, Signamax 065-1696, 10/100/1000 To 1000SX/LX Managed Media Converters, Signamx Media Converters, Managed Media Converts, 100BaseFX Solutions, Gigabit Ethernet Solutions








Product
Categories


About Us

cable, vdsl, patch

 

Signamax- Signamax 065-1696- 10/100/1000 To 1000SX/LX Managed Media Converters- Signamx Media Converters- Managed Media Converts- 100BaseFX Solutions- Gigabit Ethernet Solutions




OAM Managed Media Converters

OVERVIEW

Signamax Connectivity Systems' 065-16xxOAM series Managed Operations, Administration & Maintenance (OAM) Media Converters are designed to provide Local Exchange Carriers (LECs), Internet Service Providers (ISPs), and large installations such as airports with media conversion solutions that can provide device information, testing, and integration with standards-based operations systems in a Fiber to the Premises (FTTP) environment. These converters adhere to the IEEE 802.3ah standard for Link Monitoring, Remote Failure Indication, and Remote Loopback
capabilities.

The Signamax OAM media converter series are equipped with a 10/100/1000BaseT/TX RJ45 port and a fiber interface that supports either 1000Base or 100Base connections. Multimode and singlemode models share the same OAM feature set, so that commercial entities who utilize multimode fiber for their Local Area Networks (LANs) can get the same advantages of remote fault detection and testing and controlling unnecessary dispatches as carriers using singlemode fiber for their Wide-Area Networks (WANs). 

KEY FEATURES

  • Complies with the IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX/FX, IEEE 802.3ab 1000BaseT, and IEEE 802.3z 1000BaseSX/LX Ethernet ransmission standards.
  • Complies with the IEEE 802.3ah OAM standard.
  • Supports SNMP v1 & v2c Management.
  • Supports Q in Q double tagged frame transparent.
  • Supports in-band Loopback and Diagnostics.
  • DIP switch configuration for Link Fault Signaling.
  • One fiber interface supports dual rate 100BaseFX/BX or 1000BaseSX/LX/BX fiber transmission.
  • Gigabit transmission supports 9K Bytes jumbo frames.
  • 1000 Mbps - Auto/Full-duplex, 10/100Mbps - Full/Half-duplex, Auto-Negotiation, and Auto-MDI/MDIX.
  • Supports IEEE 802.3x Flow Control: Flow control for Full-duplex and Back pressure for Half-duplex.
  • Full wire-speed forwarding rate.
  • Operating voltage and maximum current consumption: 0.25A @ 12 V DC. Power consumption: 3 Watts Max.
  • 12 V DC external universal power supply unit.
  • -23° F to 131° F (-5° C to 55° C) operating temperature range. 

SPECIFICATIONS

  • APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX/FX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3ah OAM (Operations, Administration, & Maintenance)

  • PORTS

1 - RJ-45 10/100/1000BaseT/TX ports

1 - Dual Rate 100BaseFX/BX or 1000BaseSX/LX/BX port;
Model 065-1610OAM:
SC multimode connector;
1000BaseSX/BX span: 220m on 62.5I multimode fiber/550 m on 50I multimode fiber 100BaseFX/BX
span: 2 km on either 62.5I multimode fiber or 50I multimode fiber

Model 065-1610OAMED: 
SC multimode connector;
1000BaseSX/BX span or 100BaseFX/BX span: 2 km on either 62.5I or 50I multimode fiber

Model 065-1620OAM10: 
SC singlemode connector;
1000BaseSX/BX span or 100BaseFX/BX span: 10 km on singlemode fiber

Model 065-1610OAM20: 
SC singlemode connector;
1000BaseSX/BX span or 100BaseFX/BX span: 20 km on singlemode fiber

  • LED STATUS INDICATORS

Per Media Converter: Power; OAMLOOP
Per Copper RJ-45 Port: Speed, FDX, LNK/ACT
Per Fiber Port: LNK/ACT

  • PERFORMANCE

Latency: <4.2 μs (LIFO).
Throughput, per port: 14,880 pps for 10 Mbps; 148,810 pps for 100 Mbps; 1,488,100 pps for 1000 Mbps (64-byte packets)
Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance)
MAC Address Capacity: 1,024 MAC addresses
Jumbo Frame Support: 9 K packets supported

  • VLAN CAPABILITIES

IEEE 802.1Q Tag-based VLAN supported; up to 4K active VLANs possible
Supports Q-in-Q Double Tagged Frame Transparent

  • MANAGEMENT

Access Methods: Via SNMP agent and Web browser.
Software Upgrade Capability: Via TFTP
SNMP v1 and v2 Network Management supported.
IEEE 802.3ah OAM supported.

  • CERTIFICATIONS

Safety: CE Mark
EMI: FCC Part 15 Class A; CE Mark Class A; VCCI Class A

  • PHYSICAL CHARACTERISTICS

Dimensions: 3.94" (W) x 4.8" (D) x 1.28" (H) (100mm x 122mm x 32.5mm)
Housing: Metal case, with built-in fiber splice tray.
Weight: 1.1 lbs (0.5 kg)

  • ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: 23°F to 131°F (-5°C to 55° C).
Storage Temperature: -4°F to 158°F (-20°C to 70° C).
Operating Humidity: 5 to 95% RH, non-condensing.

  • ELECTRICAL CHARACTERISTICS

Power Supply: External power adapter 12 Volts DC, 0.25 Amp
Maximum Power Consumption: 3 Watts.

  • WARRANTY

Lifetime. 

DOWNLOADS

Download Datasheet (PDF 392 Kb) Revised 02.23.2012

Download User's Guide (PDF 3.69 Mb) Revised 01.12.2012

Managed Media Converts
100BaseFX Solutions

Gigabit Ethernet Solutions
10/100/1000BaseT/TX to 1000BaseSX/LX Managed Stand Alone Converters


Signamax Media Converters

 

Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert a wide variety of data - from serial RS-232 through Standard, Fast, Gigabit Ethernet and SONET/SDH protocols. Conversions from twisted-pair copper cable, coaxial cable, multimode fiber and singlemode fiber, to other types of cable are all possible with the wide array of solutions from Signamax Connectivity Systems.

 

 

 

 

 

 

Network Connectivity

Media Converters Media Converters
Ethernet Switches Ethernet Switches
Industrial Ethernet Industrial Ethernet
SFP Interface Modules SFP Interface Modules
Optical Fiber NICs Optical Fiber NICs

Premise Connectivity

Work Area   Outlet Systems Work Area Outlet Systems
Patching Systems Patching Systems
Cross-Connect Systems Cross-Connect Systems
Patch   CordsPatch Cords
Optical Fiber Systems Optical Fiber Systems
Support Structures Support Structures

 

BIF-Bend Insensitive Fiber

New Bend Insensitive Fiber Jumpers

Raceway Systems- Cable Tray

 
 
 
 
 
 
 
 
 
 
 
 

 

 






Be the first to comment

Leave a Reply

Your email address will not be published.


*