28 Gauge SCSI Cable 
- UL/CSA Listings: (UL) CMG c(UL) 75°C
- Meets UL 444 FT-4 Burn requirements
SCSI 28 AWG Cable Features
- Band-Marked for high-density termination
- High density and/or VHDCI compatible
- Round, smooth and firm for overmolding
- Meets ANSI X3T.9 (Project 0375M Publishes Ref. X3-131-1994) and X3T.10 (Per ANSI X3T.10 Document: 855 Annex D) Standards for interconnection of SCSI devices
- Harmonized CMG listed for safety
28 Gauge SCSI Electronic Cable Description
Basic construction of the SCSI 2 cable uses 28 Gauge (AWG) solid or stranded conductors with FRPP insulation. Conductors are then twisted into pairs with varying left-hand lays to reduce crosstalk. The required number of pairs are cabled with a left-hand lay, wrapped with a foam polypro tape. The cable is then dual shielded with an AL/PET tape (aluminum side out) and braid shield (A 28 AWG drain wire is inserted between the two shields). The SCSI 2 wire is then jacketed in a CMG rated PVC jacket.†
† Black (000) is standard for this product but other colors are available upon request.
28 AWG SCSI Cable Applications
- Parallel PC processing
- High speed interconnect CPU management
- Board to board interface
- Ultra 640 (40426), Ultra 320, Ultra 160
- Fast 80, Fast 40, Fast 20, Fast 10, Fast 5
- Storage array systems
- Blade storage devices
- HDD (High Density Disks)
- Parallel SCSI, Ultra SCSI and Fast SCSI
- RAID Devices
| Distributor Name | Phone Number |
|---|---|
| Anixter | 888-264-9784 |
| Heilind Electronics | 800-400-7041 |
| Mann Organization | 800-553-5543 |
Leave a Reply